201: Amplifiers

201-MAXAMP-150X
$108.00
100 watt per ch @ 8 ohm stereo power amp, 200 watts per channel at 4 ohms. Greater heat resistance for long running time. This amp will give a true 100 watts per channel and will go all night long without missing a single bass hit. Electronic start delay protection; short circuit protection; dual cooling fans; quarter inch, RCA, and XLR inputs; Mode switch ( Stereo, Bridge ); ground/lift switch; Outputs; neutrik and binding post outputs. THD= 20Hz - 20KHz < 0%. Frequency response= 20Hz - 20KHz ± 0.5 db. Signal to noise ratio ³ 110 db. Size - 19 x 4.0 x 12.00d. 2 rack spaces. Weight - 13.0 lb.

Add to Wishlist
Quantity

201-SLIMAMP-125
$135.00
1 rack space amplifier from Speakermax. 2 x 125 watts @ 8 ohms, 2 x 250 watts @ 4 ohms. Front panel: power switch, power and protect LEDS, channel A and B level knobs, channel A and B LED level meters. Rear panel: balanced XLR and quarter inch inputs, dual banana binding posts and neutrik speaker outputs, input voltage selector, ground lift switch, fuse, 110/220 operation switch. Fan cooled. Frequency response- 20 Hz to 20 kHz. THD- 0.03%. Damping factor- 250. Signal to noise >103 dB. Short circuit protection, overload protection, DC protection, softstart, temperature protection. NOT capable of running at loads below 4 ohms, NOT capable of bridge mono. Size- 19w x 17.75d x 1.75. Weight- 20 lb..

Add to Wishlist
Quantity

201-TNT-AMP
$177.00
Space saving solution specifically for DJ's. This remarkable, single-rack-space power amplifier delivers incredible performance and sound, in a 1-U chassis, making it an excellent choice for mobile DJ's, as well as club installations. Delivers superior sound that will fill a room. 2 x 150 watts @ 8 ohms, 2 x 280 watts @ 4 ohms. Front panel: power switch, power and protect LEDS, channel A and B level knobs, channel A and B LED level meters. Rear panel: balanced XLR and quarter inch inputs, dual banana binding posts and neutrik speaker outputs, input voltage selector, ground lift switch, fuse, 110/220 operation switch. Fan cooled. Frequency response- 20 Hz to 20 kHz. THD- 0.03%. Damping factor- 250. Signal to noise >103 dB. Short circuit protection, overload protection, DC protection, softstart, temperature protection. NOT capable of running at loads below 4 ohms, NOT capable of bridge mono. Size- 19w x 17.75d x 1.75. Weight- 20 lb.

Add to Wishlist
Quantity

201-SLIMAMP-150
$145.00
1 rack space amplifier from Speakermax. 2 x 150 watts @ 8 ohms, 2 x 280 watts @ 4 ohms. Front panel: power switch, power and protect LEDS, channel A and B level knobs, channel A and B LED level meters. Rear panel: balanced XLR and quarter inch inputs, dual banana binding posts and neutrik speaker outputs, input voltage selector, ground lift switch, fuse, 110/220 operation switch. Fan cooled. Frequency response- 20 Hz to 20 kHz. THD- 0.03%. Damping factor- 250. Signal to noise >103 dB. Short circuit protection, overload protection, DC protection, softstart, temperature protection. NOT capable of running at loads below 4 ohms, NOT capable of bridge mono. Size- 19w x 17.75d x 1.75. Weight- 20 lb..

Add to Wishlist
Quantity

201-XTUNER
$184.00
2 WIRELESS MICS INCLUDED !!!! 201-XTUNER Powered tuner is a modern tuner for our times. It has many of the features that we need at an affordable price. 200 wpc@8 ohm, amp & 2 wireless mics, Digital Hybrid Amp / Preamp / Tuner, Powers 2 seperate sets of loudspeakers, Separate gain control for preamp and subwoofer, Inputs: 2 sets of RCA (2 audio sources), iPod / MP3 input, 2 wired mic inputs, Outputs: Banana binding post (to speakers), 1 stereo RCA record line output, 2 mono RCA subwoofer outputs, 1 stereo RCA preamp output, Digital fluorescent output display,Size: 19"w x 3.5"h x 13"d Weight: 18 lb. Box size: 24.0 x 15.0 x 6.0 Box weight: 19 lb. 110-220V Switchable

Add to Wishlist
Quantity

201-MAXAMP-450
$289.00
450 watts RMS. Per Channel @ 8 Ohms, Low-Z XLR or HI-Z 1/4 inputs, Speakon or Dual banana outputs, Stereo , Parallel or Bridged operation,1 kHz, 0.1% THD, 680 watts RMS. Per Channel @ 4 Ohms, 1 kHz, 0.1% THD, 800W RMS. @ 4 Ohms, 1K Hz, 1% THD Bridge Mono Mode, Total Harmonic Distortion: Less Than 0.1% 20 Hz - 20 kHz @ 8 Ohms, Frequency Response: +/-01db, @ rated output Power / 8 Ohms 20 Hz - 20K Hz, High/Low Pass Filter, Input Sensitivity Selector, Ground Lift, Limiter, Size: 15.7in D x 19.0in W x 3.5in H, Weight: 42 lb. Fuse 156-F30-S.

Add to Wishlist
Quantity

201-TECH500
$377.00
2 channel power amplifier by Gem Sound. 500 watts per channel at 8 ohms. 720 watts per channel at 4 ohms. Not capable of 2 ohms. 1300 watts at 8 ohms bridge mono. Features: Dual Clip / Pgm, indicators, Br / ST indicator ; Dual gain control ; unbalanced 1/4 inch, and balanced XLR inputs; dual banana binding posts, and neutrik outputs; ground lift switch ; cooling fan; 115V/230V selector; and 1 year limited warranty through the manufacturer. Pop out Circuit breaker, Size- 19 (standard rack mount) x 13.5 x 4.0 Mounting depth- 17.50 - 18.0 . Weight- 32.0 lb. Box size: 21.0 x 19.0 x 8.0 Box weight: 37.0 lb.

Add to Wishlist
Quantity

201-500X2G
$399.00
2 channel power amplifier by Gem Sound. 500 watts per channel at 8 ohms. 1000 watts per channel at 4 ohms. Not capable of 2 ohms. 2000 watts at 4 ohms bridge mono. Features: dual VU meters; balanced 1/4 inch, and balanced XLR inputs; dual banana binding posts, 1/4 inch, and neutrik outputs; input sensitivity switch (0.7V, 1.0V, 1.44V); compressor; ground lift; dual cooling fans; 115V/230V selector; and 1 year limited warranty through the manufacturer. Size- 19 (standard rack mount) x 18.25 x 3.5 (2 rack spaces). Mounting depth- 17 1/8. Weight- 53 lbs.
Quantity

201: Amplifiers

Need Help? Call Us At 800 880-0883